In this Settings, the administrative and appliance E-Mail address is configured, the notifications, pop3 functionality as well as the communiction to the REDDOXX portal.
Enter the e-mail address of the REDDOXX Appliance.
The e-mail address of the REDDOXX Appliance must be an e-mail address of a valid e-mail domain and also received by the REDDOXX Appliance.
This e-mail address may not be used for other purposes
Enter the e-mail address of the administrator.
To this email address the administrator receives messages from the appliance, e.g. when the backup was not finished correctly.
Select if notifications should be sent in case of Problems e.g. a failed backup or detected hardware failure.
You can configure to send the notifications directly to an remote smtp Server.
If you do not use a remote SMTP server, the appliance will send a notification via its own email engine.
In case the appliance will have a problem with its own engine, the notification fails.
Enable the POP3 proxy service, if the REDDOXX appliance should answer to POP3 / secured POP3 requests from the internal Network.
The appliance listens on TCP-Port 110 for POP3 and TCP-Port 995 for POP3s.
Further Information to POP3 and Bridge-Mode can be found in the POP3 and Bridge Mode Configuration Manual.